CE Approved Swimming Pool Heat Exchanger

This Compacted swimming pool heat exchanger has spiral twisted tubes design which enhanced high heat transfer efficiency.

1. Material: Full titanium (full stainless steel 316L)

2. Tubes: spiral twisted tubes

3. Connectors: BSPT thread or NPT thread

4. Design pressure: 1.31MPa5. Design temperature: 208C

5. Surface: polished

6. Mounting bracket is available

7. Special design for boiler or solar water pool heating system.

8. Packing: carton with wooden case.

Advantages:

1. Increase heat transfer efficiency for water heating2. Big flow with low pressure drop design suitable for all application.3. Prevent the fouling or scare on the tube surface.4.Full titanium construction produces a high anti-corrosion advantage for swimming pool water, sea water, and other solutions with high chlorine concentration.5. Polish surface has a good feature.6. Compacted design7. Durable material constructed

Heat Exchangers Performance of Swimming Pool Heat Exchangers:

Model	Normal Capacity		Pool Capacity
	kW	kBtu/Hr	Gallons@1°F/hr	M3@1°C/hr
SP-55	16	55	4700	32
SP-85	25	85	7300	49.7
SP-155	45	155	13300	90.6
SP-210	60	210	18000	122.6
SP-300	88	300	25800	175.8
SP-360	105	360	31500	214.6
SP-600	175	600	52500	357.7
SP-1200	352	1200	105600	719
SP-2400	704	2400	211200	1438
SP-3000	880	3000	264000	1797.5
SP-3600	1056	3600	316800	2157
SP-4500	1310	4500	396000	2700
SP-5000	1460	5000	439000	3000

Note:

1. For occasional (holidays & weekends) use pools we recommend a 2x output multiplier to obtain a 2°F/hr heat up rate;

2. Nominal values are based on 60°C temperature between incoming heating and heated water.

Typical residential application:

In-floor heating

Swimming pools, spas heating

Driveway snowmelts

 

Typical industrial application:

Oil cooler

Transmission and engine cooler

Boiler sample cooler

Waste water heat recovery

CE Approved Swimming Pool Heat Exchanger